Where Is The Microphone On Airpods? Why Is It Not Working?
Recently, users have been experiencing problems with the AirPods’ microphone not working. With no information on the whereabouts and troubleshooting, this illuminated an entire thread of discussion that cited various reasons. In this article, I tell you where the microphone is on AirPods and why it is not working. Although AirPods serve as a handy tech gadget for listening to music, making calls, and syncing well with your iPhone, iPad, and Mac, there are odd days when they stop working properly.
Recognizing all of this, I decided to explore the possible causes of this problem and ways to overcome it.
Where Is The Microphone On Airpods?
We all know that AirPods have a powerful microphone. However, not many people know where it is located. That may be why troubleshooting the AirPods microphone can be a problem. So, before we go any further, let’s find out first.
Your pair of AirPods has two noise-canceling microphones. You can find them at the bottom of the earpiece . It’s a thin silver section with matching grilles.
On AirPods, a second microphone is housed inside the earpiece. During a call, you can utilize this microphone to help lessen background noise and improve the clarity of your speech.
Now that you know the location let’s find out the possible reasons for it not working.
Possible Causes Of AirPods Microphone Not Working
- Dust particles: dust may accumulate in or around the microphones due to dropping or after adventures.
- Not fully charged: another common cause could be that your AirPods have a dead battery.
- Pairing problem: this could be due to slow processing, lack of Bluetooth signal selection, etc. Although this is rarely encountered, it is quite common with wireless devices, especially when there is some interference.
- Settings: no need to explain. Most problems with smart devices can be solved by making small changes to the settings.
Now that we are familiar with the possible causes, let’s find out.
Quick Fixes For Your AirPods Microphone Not Working
1. Clean The Microphone
Take a dry cotton swab and wipe the microphone with it. Also, consider brushing with a soft-bristle brush to remove debris. I would suggest that you do this to the speaker mesh from time to time to ensure trouble-free listening. Just remember to be gentle.
2. Solve The Problem With The AirPods Battery
If your AirPods are draining quickly, consider turning on auto-detect mode. Here’s how to do it.
Note. Make sure your AirPods are connected to your iPhone or iPad and active.
- Open the Settings app and tap “Bluetooth.”
- Tap the (i) icon next to your AirPods. Now turn on autodetect mode.
- Connect your AirPods.
Turn off Bluetooth and turn it back on after a while. Although this will reconnect your AirPods to your iPhone and iPad, I suggest you take your AirPods off and keep them in the case for about 10 seconds. That should help solve the problem.
3. Perform A Factory Reset Of The Airpods
- Check the Bluetooth settings on your iPhone.
- In the Settings app on your iPhone, tap Bluetooth.
- In the My Devices list, select your AirPods.
- Tap “Microphone” and select left or right AirPods from the available options.
- Contact Apple Care.
If none of the fixes mentioned above worked, there is probably a hardware issue. I would recommend visiting your nearest Apple Care Center for a solution in this scenario.
The solutions listed here are based on fundamental causes that may be affecting your microphone. I hope this has helped you solve the problem. If you have any other troubleshooting tips or problems, share them below.
Why Is My Microphone Not Working Properly On My Airpods?
Are you having trouble using the microphones on your AirPods? Several causes can prevent them from working properly, such as dirt inside the microphone holes, misconfigured settings, minor errors, or malfunctions.
How Do I Turn On The Microphone On My Airpods?
Select “Left” or “Right,” then select one of the options. Select one of the options for the microphone: “Always Left,” “Always Right,” or “Auto. Tap “Microphone,” then select the desired option. If “Auto” is selected, either AirPods can be used as a microphone.
What Do I Do If I Can’t Hear Well On My Airpods?
AirPods are hard to hear
- Improve Bluetooth connectivity.
- If the connection to the AirPods is still missing.
- Breaking the pairing with the headphones.
- Re-pairing with the headphones.
- Checking the physical condition of the headphones.
- Reloading the headphones.
- Phone Problem.
- Service center.
What Should I Do If I Can’t Hear You Well On Airpods?
In Airpods, you can’t hear the person you’re talking to very well. How do you fix it?
- Check the physical condition of the headphones.
- Reboot headphones.
- Phone problem.
- Service center.
How Do I Clean The Microphone On My Airpods?
Cleaning AirPods headphones
- Do not rinse the AirPods under water.
- Use a soft, dry, lint-free cloth.
- Make sure no liquid enters the holes.
- Gently clean the microphone and speaker grids with a dry cotton swab.
- When cleaning the AirPods, do not use sharp objects or abrasive materials.
How Can AirPods Break?
- AirPods don’t play well enough …
- The volume of the headphones leaves a lot to be desired …
- The AirPods lose connection at a short distance …
- AirPods sometimes still fly out of your ears …
- Headphones are lost quite often …
- Sometimes the earmolds stop playing music…
- AirPods refuse to connect to the iPhone.
How do I test the microphone in my headphones?
Checking the headset through Windows
- Open Start.
- “control Panel.
- “sounds and Audio Devices.”
- Start a check in the “Speech Recording” section.
- Press “Next” after the “Audio Devices Wizard” appears.
- Say a few words when the Microphone Test window opens.
- Press “Next.”
How Do I Check The Microphone On My iPhone Headphones?
Checking the audio level of your headphones in the Control Point on your iPhone
- Add the “Hearing” feature to Control Point. See …
- Plug in and put on your headphones.
- Open the Control Point and tap.
- Play audio on your iPhone. The headphone audio level (in decibels) is shown in the Headphone Level indicator.
How Do I Check The Microphone When I Buy It?
Inspect it for rust, streaks, or bumps when buying a microphone. The presence of corrosion on the microphone means that the microphone has been operated without special flaps (pop filters) and at very close distances.
Do They Fall Out Or Not?
This is just like the regular ones – you have to try. Some do, some do not. But the proportion of those for whom AirPods Pro do not stick in their ears has certainly become smaller. The package includes three pairs of silicone ear cushions in different sizes: M is already worn on the headphones, and S and L are intricately packaged, as they know how to do in Apple.
Separately, it’s interesting how the fitting will play out in offline Apple Stores. Standard AirPods are treated with sanitizer after each fitting, at least in the UK. According to the idea, silicone nozzles are easier to replace the whole, but whether this is so is not clear yet.
In addition to purely subjective feelings, the tightness of the fit can be checked programmatically. In the Bluetooth settings, you need to click on the AirPods Pro, select the appropriate item there, and press Play – a few seconds of music will play, after which the headphones will give a verdict on the earpieces. M fit me from the first time, but after two months, no matter what size ear cushions I chose, the “perfect fit” has not been achieved. Although subjectively nothing has changed in two months.
The ear cushion connection is unusual, much wider than standard. They do not gently curl around the base of the headphones but noticeably click into the grooves with their solid, almost solid base. In the beginning, the bracket seems flimsy, but if you pull the headpiece, it is scary to rip it to pieces – it is so tight.
Have The Microphones Become Better In The New Versions?
If you decide, I’ll respond by recording the same excerpt on the AirPods, AirPods Pro, and iPhone 11 Pro. I think it’s a little better.
Does It Work With Android?
Yes, of course, just like any other BT headphones. And even the noisemaker will work – will turn on and off on a long press on the sensors.
True, the AirPods won’t be able to pair with an Android phone simply by opening the case’s cover. First, you will have to put the headphones in detection mode: press the button on the back of the case until the white LED on the front starts flashing. They will then become visible in the Bluetooth menu on the smartphone.
Also, there is no software on Android gadgets like the iPhone that allows you to reassign the buttons on the headphones. A long press on any earpiece will always turn noise cancellation on or off, and Siri, understandably, can be called – there is no place.